首页 科技问答 H3C WA2210E-IP地址查找

H3C WA2210E-IP地址查找

科技问答 196
1692025924,

问题描述:

我这里有一台H3C WA2

组网及组网描述:


8小时前提问

终端连接上无线使用终端获取的网关ip登录看看行不

7小时前回答

暂无

通过扫描wifi的软件扫描到这个AP的信号bssid,里面会显示这个AP的mac地址。

然后通过接入交换机查端口的MAC地址表就能查到在哪个端口下。

或者挨个给接入交换机shutdown端口,看关掉哪个端口这个wifi不可用了 或者不见了就能找到。

7小时前回答

暂无

您好,可以根据当时练练的链路,知道对端的设备

然后再对端的设备dis mac找到对应的mac地址

然后再网关设备通过dis arp 找到对应的IP

7小时前回答

暂无

如果指导ap的ip可以先开启telnet功能,v5的ac方法:

   4、      进入隐藏模式,进行如下配置即可登录AP:

 

[H3C]_h

Now you enter a hidden command view for developer's testing, some commands may

affect operation by wrong use, please carefully use it with our engineer's

direction.

 [H3C-hidecmd]wlan ap-execute all exec-control enable

 [H3C-hidecmd]wlan ap-execute all telnet enable

 

   5、      telnet登录AP:

 

telnet 192.168.1.2

Trying 192.168.1.2 ...

Press CTRL+K to abort

Connected to 192.168.1.2 ...

******************************************************************************

* Copyright (c)

* Without the owner's prior written consent,                                 *

* no decompiling or reverse-engineering shall be allowed.                    *

******************************************************************************

<3c8c-403c-88d0>

<3c8c-403c-88d0>dir

Directory of flash:/


V7ac方法:

[H3C]probe
[H3C-probe]wlan ap-execute all exec-console enable

Then telnet can be.
The default password is h3capadmin.  


登录上ap后直接执行恢复出厂命令即可:reset sa

7小时前回答

暂无

补充一下,目前这个ap处于,可正常使用,实物找不到,IP不知道,也不知道是否配置过IP的状态,可以通过交换机端口一个个查找到连接的网线,但是还是不知道该设备IP地址甚至不知道该设备是否有IP地址,所以想找个H3C内网管理或者内网搜索的软件,目前是1台ubuntu设备连着这个ap的无线接入内网的,不知道可不可以通过什么方式查到这个ap的IP

7小时前回答

暂无

你正在内容来源:知了社区,H3C WA2210E-IP地址查找