首页 科技问答 y8aQG,F1000-T200 通过CONSOLE口,不小心格式化了,就启动不起来了。现在怎么办?

y8aQG,F1000-T200 通过CONSOLE口,不小心格式化了,就启动不起来了。现在怎么办?

科技问答 183
1686151043,CRM论坛(CRMbbs.com)——一个让用户更懂CRM的垂直性行业内容平台,CRM论坛致力于互联网、客户管理、销售管理、SCRM私域流量内容输出5年。 如果您有好的内容,欢迎向我们投稿,共建CRM多元化生态体系,创建CRM客户管理一体化生态解决方案。内容来源:知了社区

问题描述:

开机后,就一直提示这个。。 


**************************************************************************** * * * H3C SecPath BootWare, Version 3.02 * * * **************************************************************************** Copyright (c)

组网及组网描述:

 **************************************************************************** * * * H3C SecPath BootWare, Version 3.02 * * * **************************************************************************** Copyright (c)

5小时前提问

进入CTRL+B  下载版本,直接刷系统


5小时前回答

暂无

bootware下刷一下版本

5小时前回答

暂无


==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 7

=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 2
Will you restore the Basic BootWare? [Y/N]Y
Begin to restore Normal Basic BootWare............Done.
Will you restore the Extended BootWare? [Y/N]Y
Begin to restore Normal Extended BootWare...........Done.

=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):

=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 



弄完后,还是不能启动!

5小时前回答

暂无

专用款型,软件包找400要或者找当地办事处要把

4小时前回答

暂无

你正在,F1000-T200 通过CONSOLE口,不小心格式化了,就启动不起来了。现在怎么办?