8PKlT0,WiFi连不上认证失败是什么原因?
问题描述:
相同的service-template不同型号的AP能连上,只有这个型号的连不上,WiFi密码都输对了,就是连不上。WPA2/WPA3加密的WiFi
Client xxxx went offline from xxxx with SSID xxxx on AP Livingroom Radio ID 2. State changed to Unauth. Reason: Number of sent SA requests exceeded the permitted threshold.
组网及组网描述:
wlan service-template Temp
ssid Temp1
vlan 10
client forwarding-location ap
quick-association enable
address-security enable
sacp roam-optimize traffic-hold enable advanced
akm mode psk
preshared-key pass-phrase cipher <password>
cipher-suite ccmp
security-ie rsn
ptk-lifetime 300
gtk-rekey method time-based 300
gtk-rekey enable
ptk-rekey enable
wpa3 personal optional
client-security intrusion-protection enable
pmf optional
service-template enable
#
ap-model WA6522H-HI
map-configuration flash:/WA6522H-HI.txt
radio 1
max-power
rate mandatory 12 24
rate supported 18 36 48 54
rate disabled 6 9
radio enable
service-template Temp1
service-template Temp2
service-template Temp3
radio 2
max-power
rate mandatory 11
rate supported 12 18 24 36 48 54
rate disabled 1 2 5.5 6 9
radio enable
service-template Temp1
service-template Temp2
service-template Temp3
gigabitethernet 1
gigabitethernet 2
gigabitethernet 3
gigabitethernet 4
#
如果不加密是否可以连接。
在ac上看下连接失败的原因是什么:
无线终端关联失败故障排查 - 知了社区 (h3c.com)
冬冬说无线 | 故障排查篇 - 终端无法关联 - 知了社区 (h3c.com)
不加密可以,测试了WPA2也可以,估计是WPA3的问题
这个是本地转发,检查下相应vlan都放通了吗
1小时前回答WPA3的问题,用WPA2解决了
1小时前回答你正在,WiFi连不上认证失败是什么原因?