qALKRl,H3C SECPATH F100-C-G2 如何将内网一个ip映射到外网
问题描述：
想知道如何完成映射
12小时前提问外网口
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] nat server protocol tcp global
[Sysname-GigabitEthernet1/0/1] quit
看您具体的业务，不需要就直接IP
暂无
你好，
可以参考下面这个配置图解，有web界面配置每一步的截图。
https://www.h3c.com/cn/d_
11小时前回答暂无
防火墙有web的，直接在web界面配置就行了
11小时前回答暂无
您好，请知：
可以使用nat server将内部服务器映射到外网，以下是配置案例，请参考：
组网说明：
本案例采用H3C HCL模拟器的F1060来模拟NAT server典型组网配置，内网和外网在网络拓扑图中已经有了明确的标识，FW1作为内网的出口设备，不仅保护内网的安全，也提供地址转换的服务。内网申请了
配置步骤
1、按照网络拓扑图正确配置IP地址
2、Web_server开启WEB功能，并创建相应账户及赋予权限
3、FW1配置NAT地址转换，并配置默认路由指向外网
4、FW1配置nat server，并发布内网的WEB服务器
配置关键点
Web_server:
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]sysname web_server
[web_server]int gi 1/0/1
[web_server-GigabitEthernet1/0/1]port link-mode route
[web_server-GigabitEthernet1/0/1]des <connect to FW1>
[web_server-GigabitEthernet1/0/1]ip address 10.0.0.2 30
[web_server-GigabitEthernet1/0/1]quit
[web_server]ip route-static 0.0.0.0 0.0.0.0 10.0.0.1
[web_server]ip http enable
[web_server]ip https enable
[web_server]local-user admin
New local user added.
[web_server-luser-manage-admin]password simple admin
[web_server-luser-manage-admin]service-type http https
[web_server-luser-manage-admin]authorization-attribute user-role network-admin
[web_server-luser-manage-admin]quit
[web_server]
ISP:
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]sysname ISP
[ISP]int gi 0/1
[ISP-GigabitEthernet0/1]ip address
[ISP-GigabitEthernet0/1]quit
[ISP]int gi 0/0
[ISP-GigabitEthernet0/0]des <connect to FW1>
[ISP-GigabitEthernet0/0]ip address
[ISP-GigabitEthernet0/0]quit
FW1:
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]sysname FW1
[FW1]acl basic
[FW1-acl-ipv4-basic-
[FW1-acl-ipv4-basic-
[FW1]
[FW1]zone-pair security source trust destination untrust
[FW1-zone-pair-security-Trust-Untrust]packet-filter
[FW1-zone-pair-security-Trust-Untrust]quit
[FW1]
[FW1]zone-pair security source untrust destination trust
[FW1-zone-pair-security-Untrust-Trust]packet-filter
[FW1-zone-pair-security-Untrust-Trust]quit
[FW1]
[FW1]zone-pair security source trust destination local
[FW1-zone-pair-security-Trust-Local]packet-filter
[FW1-zone-pair-security-Trust-Local]quit
[FW1]
[FW1]zone-pair security source local destination trust
[FW1-zone-pair-security-Local-Trust]packet-filter
[FW1-zone-pair-security-Local-Trust]quit
[FW1]
[FW1]zone-pair security source untrust destination local
[FW1-zone-pair-security-Untrust-Local]packet-filter
[FW1-zone-pair-security-Untrust-Local]quit
[FW1]
[FW1]zone-pair security source local destination untrust
[FW1-zone-pair-security-Local-Untrust]packet-filter
[FW1-zone-pair-security-Local-Untrust]quit
[FW1]int gi 1/0/3
[FW1-GigabitEthernet1/0/3]des <connect to web_server>
[FW1-GigabitEthernet1/0/3]ip address 10.0.0.1 30
[FW1-GigabitEthernet1/0/3]quit
[FW1]security-zone name Trust
[FW1-security-zone-Trust]import interface GigabitEthernet 1/0/3
[FW1-security-zone-Trust]quit
FW1 NAT及NAT server关键配置点：
[FW1]acl basic
[FW1-acl-ipv4-basic-
[FW1-acl-ipv4-basic-
[FW1]int gi 1/0/4
[FW1-GigabitEthernet1/0/4]des <connect to ISP>
[FW1-GigabitEthernet1/0/4]ip address
[FW1-GigabitEthernet1/0/4]nat outbound
[FW1-GigabitEthernet1/0/4]nat server protocol tcp global
[FW1-GigabitEthernet1/0/4]nat server protocol tcp global
[FW1-GigabitEthernet1/0/4]quit
[FW1]ip route-static 0.0.0.0 0.0.0.0
[FW1]security-zone name Untrust
[FW1-security-zone-Untrust]import interface GigabitEthernet 1/0/4
[FW1-security-zone-Untrust]quit
物理机填写IP地址：
物理机打开浏览器，输入网址：https://
输入用户名、密码，点击登录：
登陆成功：
查看FW1 NAT的显示信息：
[FW1]dis nat session verbose
Slot 1:
Total sessions found: 0
[FW1]dis nat session verbose
Slot 1:
Initiator:
Source IP/port:
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/4
Source security zone: Untrust
Responder:
Source IP/port: 10.0.0.2/443
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/3
Source security zone: Trust
State: TCP_ESTABLISHED
Application: HTTPS
Rule ID: 0
Rule name:
Start time:
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Initiator:
Source IP/port:
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/4
Source security zone: Untrust
Responder:
Source IP/port: 10.0.0.2/443
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/3
Source security zone: Trust
State: TCP_ESTABLISHED
Application: HTTPS
Rule ID: 0
Rule name:
Start time:
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Initiator:
Source IP/port:
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/4
Source security zone: Untrust
Responder:
Source IP/port: 10.0.0.2/443
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/3
Source security zone: Trust
State: TCP_ESTABLISHED
Application: HTTPS
Rule ID: 0
Rule name:
Start time:
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Initiator:
Source IP/port:
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/4
Source security zone: Untrust
Responder:
Source IP/port: 10.0.0.2/443
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/3
Source security zone: Trust
State: TCP_ESTABLISHED
Application: HTTPS
Rule ID: 0
Rule name:
Start time:
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Initiator:
Source IP/port:
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/4
Source security zone: Untrust
Responder:
Source IP/port: 10.0.0.2/443
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/3
Source security zone: Trust
State: TCP_ESTABLISHED
Application: HTTPS
Rule ID: 0
Rule name:
Start time:
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Initiator:
Source IP/port:
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/4
Source security zone: Untrust
Responder:
Source IP/port: 10.0.0.2/443
Destination IP/port:
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/3
Source security zone: Trust
State: TCP_ESTABLISHED
Application: HTTPS
Rule ID: 0
Rule name:
Start time:
Initiator->Responder: 0 packets 0 bytes
Responder->Initiator: 0 packets 0 bytes
Total sessions found: 6
[FW1]
至此，F1060 NAT server典型组网配置案例1（有固定公网IP地址转换）已完成！
7小时前回答暂无
你正在,H3C SECPATH F100-C-G2 如何将内网一个ip映射到外网
