ᯤ,情况配置
问题描述：
麻烦大家帮我看下这条命令会不会清空设备当前配置：Skip Current System Configuration
组网及组网描述：
华三清空配置命令:reset save-con
save f
reboot
你这个是boot里面的吧
如果需要之前的配置信息的话，不要保存现有配置
#Apr 26 12:02:07:166
Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1 : login from Console
%Apr 26 12:02:07:306
dir %查看设备配置文件
Directory of flash:/
1 drw- - Apr 26
2 -rw- 1666 Apr 26
3 -rw- 1556 Apr 26
4 -rw- 151 Apr 26
29106 KB total (16876 KB free)
给设备和电脑配置成同网段IP地址（举例：WAC配置成192.168.100.1，电脑配置成192.168.100.2），在电脑上通过3CD软件搭建tftp服务器。
sys
System View: return to User View with Ctrl+Z.
[H3C]interface Vlan-interface 1
[H3C-Vlan-interface1]ip address 192.168.100.1 24
[H3C-Vlan-interface1]quit
[H3C]ping 192.168.100.2
PING 192.168.100.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.100.2: bytes=56 Sequence=1 ttl=128 time=7 ms
Reply from 192.168.100.2: bytes=56 Sequence=2 ttl=128 time=2 ms
tftp 192.168.100.2 put startup.cfg
File will be transferred in binary mode
Sending file to remote TFTP server. Please wait... |
TFTP: 1666 bytes sent in 0 second(s).
File uploaded successfully.
下载成功：
可以到本地相关路径（此例子中是E盘）查看到相关文件。
需要恢复之前配置
解决方法：删除密码恢复之前配置文件
使用记事本打开startup.cfg文件
删除aux0口下的认证方式和密码并保存文件
覆盖当前配置文件
tftp 192.168.100.
The file startup.cfg exists. Overwrite it? [Y/N]:y
Verifying server file...
Deleting the old file, please wait...
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait....
TFTP: 1166 bytes received in 0 second(s)
File downloaded successfully.
reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
Current configuration may be lost after the reboot, save current configuration? [Y/N]:n 不保存配置
This command will reboot the device. Continue? [Y/N]:y 确定继续重启
7小时前回答暂无
你正在,情况配置
