d4HUTC,WBC 580g2
问题描述：
WBC 580G2能否作为DHCP服务器，为AP分配地址
组网及组网描述：
可以的
2.18.1 动态分配地址典型配置举例
1. 组网需求
· 作为DHCP服务器的AC为网段10.1.1.0/24中的AP和客户端动态分配IP地址，该地址池网段分为两个子网网段：10.1.1.0/25和10.1.1.128/25；
· AC的两个VLAN接口，VLAN接口10和VLAN接口
· 为AP分配10.1.1.0/25网段的IP地址，为Client分配10.1.1.128/25网段的IP地址。
2. 组网图
图2-3 DHCP动态分配地址组网图
3. 配置步骤
配置端口属于VLAN及对应VLAN接口的IP地址
# 创建VLAN10和VLAN
<AC> system-view
[AC] vlan 10
[AC-vlan10] quit
[AC] vlan
[AC-vlan
# 将与AP连接的接口加入VLAN10、VLAN
[AC] interface gigabitethernet 1/0/3
[AC-GigabitEthernet1/0/3] port link-type trunk
[AC-GigabitEthernet1/0/3] port trunk permit vlan 10
[AC-GigabitEthernet1/0/3] port trunk pvid vlan 10
[AC-GigabitEthernet1/0/3] quit
# 配置VLAN10和VLAN
[AC] interface vlan-interface 10
[AC-Vlan-interface10] ip address 10.1.1.1 25
[AC-Vlan-interface10] quit
[AC] interface vlan-interface
[AC-Vlan-interface
[AC-Vlan-interface
配置无线服务
# 配置无线服务模板并把服务模板加入VLAN
[AC] wlan service-template service
[AC-wlan-st-service] ssid service
[AC-wlan-st-service] vlan
[AC-wlan-st-service] service-template enable
[AC-wlan-st-service] quit
# 配置AP。
[AC] wlan ap ap1 model WA63
[AC-wlan-ap-ap1] serial-id
[AC-wlan-ap-ap1] radio 1
[AC-wlan-ap-ap1-radio-1] service-template service
[AC-wlan-ap-ap1-radio-1] radio enable
[AC-wlan-ap-ap1-radio-1] quit
[AC-wlan-ap-ap1] quit
配置DHCP服务
# 开启DHCP服务。
[AC] dhcp enable
# 配置VLAN接口10和VLAN接口
[AC] interface vlan-interface 10
[AC-Vlan-interface10] dhcp select server
[AC-Vlan-interface10] quit
[AC] interface vlan-interface
[AC-Vlan-interface
[AC-Vlan-interface
# 配置DHCP地址池1，用来为10.1.1.0/25网段内的客户端分配IP地址和网络配置参数。
[AC] dhcp server ip-pool 1
[AC-dhcp-pool-1] network 10.1.1.0 mask 255.255.255.128
[AC-dhcp-pool-1] quit
# 配置DHCP地址池2，用来为10.1.1.128/25网段内的客户端分配IP地址和网络配置参数。
[AC] dhcp server ip-pool 2
[AC-dhcp-pool-2] network 10.1.1.128 mask 255.255.255.128
[AC-dhcp-pool-2] quit
13小时前回答暂无
https://www.h3c.com/cn/Service/Document_Software/Document_Center/Wlan/WBC/WBC580_G2/?CHID=273609&v=612
暂无
你正在,WBC 580g2
