1676176756,

SecPath F1

disp int g

系统当前配置如下：

version 5.2

 undo voice vlan mac-address

# domain default enable system # 

 undo alg dns undo alg rtsp undo alg h323 undo alg sip undo alg sqlnet undo alg pptp undo alg ils undo alg nbt undo alg msn undo alg qq undo alg tftp undo alg sccp undo alg gtp 

# session synchronization enable 

# password-recovery enable 

# vlan 1 

# domain system access-limit disable state active idle-cut disable self-service-url disable 

# pki domain default crl check disable # user-group system group-attribute allow-guest

 # local-user admin password cipher $c$3$jd88wWwhdnmUhw7ilL

uthorization-attribute level 3 service-type telnet service-type web 

# interface Aux

 # interface NULL

# interface GigabitEthernet

 port link-mode route 

 ip address 192.168.

# interface GigabitEthernet

 port link-mode route

 # interface GigabitEthernet

 port link-mode route 

# interface GigabitEthernet

 port link-mode route

 # vd Root id 1

 # zone name Management id

 priority 1

 import interface GigabitEthernet

zone name Local id 1 

 priority 1

zone name Trust id 2

 priority 85 

zone name DMZ id 3

 priority 5

zone name Untrust id 4 

 priority 5 

switchto vd Root 

 zone name Management id

 ip virtual-reassembly

 zone name Local id 1

 ip virtual-reassembly 

 zone name Trust id 2

 ip virtual-reassembly 

 zone name DMZ id 3

 ip virtual-reassembly

 zone name Untrust id 4

 ip virtual-reassembly 

# load xml-configuration 

# user-interface con

 user-interface aux

user-interface vty

 authentication-mode scheme 

# return 

<H3C>

2

可以尝试下加上这条命令试试：

 interzone policy default by-priority

2

非常感谢！！！！！

DXynG 发表时间：2

非常感谢！！！！！

2

,F1000-E 升级后，直连管理端口G0/0，PING不通，哪位高手给解决下,十万火急