1676095426,

问题描述：

要求0口 外网口  IP  16.169.105.26/30    1口  内网口  172.16.110.149/29  OSPF AREA 12    然后电脑是   172.16.110.54/29   然后电脑就可以PING 通  16.169.105.25    以下是目前  MSR26-00配置   看看要怎么改  谢谢

[H3C]dis cu 

# version 5.20, Release 2514P14 

# sysname H3C # domain default enable system 

# dns proxy enable 

# telnet server enable 

# dar p2p signature-file flash:/p2p_default.mtd 

# ndp enable 

# ntdp enable 

# cluster enable

# port-security enable 

# password-recovery enable 

# vlan 1 

# domain system access-limit disable state active idle-cut disable self-service-url disable 

# dhcp server ip-pool vlan1 extended network ip range 192.168.1.2 192.168.1.254 network mask 255.255.255.0 gateway-list 192.168.1.1 dns-list 192.168.1.1 

# user-group system group-attribute allow-guest 

# local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet service-type web 

# cwmp undo cwmp enable 

# interface Aux0 async mode flow link-protocol ppp 

# interface Cellular0/0 async mode protocol link-protocol ppp tcp mss 1024 

# interface NULL0 

# interface Vlan-interface1 ip address 192.168.1.1 255.255.255.0 tcp mss 1024 dhcp server apply ip-pool vlan1 

# interface GigabitEthernet0/0 port link-mode route nat outbound ip address 172.16.110.49 255.255.255.248 tcp mss 1024 

# interface GigabitEthernet0/1 port link-mode route tcp mss 1024 

# interface GigabitEthernet0/2 port link-mode bridge 

# interface GigabitEthernet0/3 port link-mode bridge 

# interface GigabitEthernet0/4 port link-mode bridge 

# interface GigabitEthernet0/5 port link-mode bridge 

# interface GigabitEthernet0/6 port link-mode bridge 

# interface GigabitEthernet0/7 port link-mode bridge 

# interface GigabitEthernet0/8 port link-mode bridge 

# interface GigabitEthernet0/9 port link-mode bridge 

# OSPF 1 area 0.0.0.17 network 172.16.110.48 0.0.0.7 

# dhcp enable # load xml-configuration 

# load tr069-configuration 

# user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme 

# return

最佳答案

sys

interface GigabitEthernet0/0
  ip address  16.169.105.26 30

  nat outbound
#

interface GigabitEthernet0/1                 //前面忘记改过来端口号
  ip address 172.16.110.49 29

quit

然后那个ospf做什么用？

你好 OSPF AREA 文件上要求配的

zhiliao_44094 发表时间：

文件上要求的   OSPF AREA  12

,MSR26-00 帮忙看看 OSPF AREA