1675913404,

设置标题

H1

H2

H3

H4

H5

正文

文字颜色

背景色

设置列表

有序列表 无序列表

对齐方式

靠左 居中 靠右 这是我的指令，在pc上telnet超时，插在24口和1口都不行 radius scheme system # domain ssh-server domain system # local-user liu password simple liu service-type ssh telnet level 3 local-user sancengji password simple h3c service-type telnet level 3 # VLAN 1 # vlan 200 # interface Vlan-interface1 ip address 192.168.1.2 255.255.255.0 # interface Vlan-interface200 ip address 192.168.254.253 255.255.255.0 # interface Aux1/0/0 # interface Ethernet1/0/1 port link-type trunk undo port trunk permit vlan 1 port trunk permit vlan 2 to 4094 # interface Ethernet1/0/2 port link-type trunk undo port trunk permit vlan 1 port trunk permit vlan 2 to 4094 # interface Ethernet1/0/3 # interface Ethernet1/0/4 # interface Ethernet1/0/5 # interface Ethernet1/0/6

组网及组网描述：

对齐方式

靠左 居中 靠右 interface Ethernet1/0/21 # interface Ethernet1/0/22 # interface Ethernet1/0/23 # interface Ethernet1/0/24 # interface GigabitEthernet1/1/1 # interface GigabitEthernet1/1/2 # interface GigabitEthernet1/1/3 # interface GigabitEthernet1/1/4 # undo irf-fabric authentication-mode # interface NULL0 # voice vlan mac-address 0001-e300-0000 mask ffff-ff00-0000 # telnet-server source-ip 192.168.1.2 # user-interface aux 0 7 user-interface vty 0 3 authentication-mode scheme protocol inbound ssh user-interface vty 4 authentication-mode scheme user privilege level 3 protocol inbound ssh # return

(0)

该问题暂时没有网友解答

,h3c 三层交换机设置telnet不能用