RT-SR6616-X无法配置VLAN，无法在vlan虚接口下配置BFD MAD检测，还能怎么配置IRF分裂检测？？

(0)

最佳答案

配置BFD MAD检测

# 创建三层聚合接口1。

<Sysname> system-view

[Sysname] interface route-aggregation 1

[Sysname-Route-Aggregation1] quit

#分别将接口GigabitEthernet1/4/0/1与GigabitEthernet2/4/0/1加入到聚合组1中。

[Sysname] interface gigabitethernet 1/4/0/1

[Sysname-GigabitEthernet1/4/0/1] port link-aggregation group 1

[Sysname-GigabitEthernet1/4/0/1] quit

[Sysname] interface gigabitethernet 2/4/0/1

[Sysname-GigabitEthernet2/4/0/1] port link-aggregation group 1

[Sysname-GigabitEthernet2/4/0/1] quit

#配置三层聚合接口1的MAD IP地址。

[Sysname] interface route-aggregation 1

[Sysname-Route-Aggregation1] mad bfd enable

[Sysname-Route-Aggregation1] mad ip address 192.168.2.1 24 member 1

[Sysname-Route-Aggregation1] mad ip address 192.168.2.2 24 member 2

[Sysname-Route-Aggregation1] quit

(0)

暂无评论

该问题暂时没有网友解答

,RT-SR6616-X 配置IRF（BFD MAD检测方式）分裂检测问题