EWP-WA5530-SI-FIT切换为瘦AP（ewp-wa5320-si-fit配置）
问题描述：
切换成胖AP后如何切换乘瘦AP，直接重启，进入boot，切换模式即可，还是需要下载瘦AP的配置文件
组网及组网描述：
无
6小时前提问 进入boot，切换模式即可，切换成fit 后有AC的情况下，去从AC下载版本了
暂无
1.1 适用产品系列
本手册适用于如下产品： WA5530、WA5510E-T、WA5530-SI、WA5630X、WA53
1.1.1 AP胖切瘦配置案例（有WX）
操作风险提示：AP胖切瘦有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。
1、在AP上执行如下操作前，必须确认wx上配置无问题、wx可以支持添加wa5530、使能了Dhcp server等。
WX配置可以参考《2.2.02 WAC380系列产品AP二层注册、无线加密配置方法（WEB版）》
2、console口登录操作，console口登录方法参考《1.03 设备管理-Console登录方法》
在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分。
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 此处按键 Ctrl+F，作用：格式化flash
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y //输入Y
...........................................................................................................................
Format success.
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): //按键Ctrl+Y，设置ap胖模式或者瘦模式
Please select the new mode
Current mode is Fat //提示当前是fat胖模式
=====================================================================
|NO. Mode |
|1 Fat Mode |
|2 Fit Mode |
|0 Exit |
=====================================================================
Enter your choice(0-2):2 //输入2，即fit瘦模式
Warning:Change from fat mode to fit mode formats the storage medium! Are
you sure to continue ? [Y/N]Y //输入Y，确认切换成fit瘦模式
......................................................................................
Formatted the storage medium successfully!
Changed to fit mode successfully! //修改成fit瘦模式成功。
此时将ap和wx网络连通，ap上电启动获取ip地址后，会主动向ac获取版本文件自动更新到ap的flash中运行。
---------------------------------
1.1.2 AP胖切瘦配置案例（无WX）
操作风险提示：AP胖切瘦有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。此情况下升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器）
1、先下载WA5300系列瘦版本，从WX的flash apimge目录下导出wa5300.ipe文件到电脑桌面上，具体步骤如下：
电脑通过网线连接到wx内网，电脑网卡设置为：192.168.0.1 255.255.255.0，设置和wx一个网段，保证电脑和wx网络可达，如下例子打开TFTP服务器， TFTP服务器目录指向电脑桌面，然后点击确定。
Wx命令行下输入
<WX>cd apimge/ //进入ap版本文件夹
<WX>tftp 192.168.0.1 put wa5300.ipe //使用tftp命令下载AP的版本
此时，已经把wx上的wa5300.ipe软件版本下载到电脑桌面上了
2、电脑通过网线连接到ap的一个网口，电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把wa5300.ipe软件版本放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定。
3、console口操作，console口登录方法参考《1.03 设备管理-Console登录方法》
在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分。
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 此处按键 Ctrl+F，作用：格式化flash
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y //输入Y
...........................................................................................................................
Format success.
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): //按键Ctrl+Y，设置ap胖模式或者瘦模式
Please select the new mode
Current mode is Fat //提示当前是fat瘦模式
===================================================================
|NO. Mode |
|1 Fat Mode |
|2 Fit Mode |
|0 Exit |
===================================================================
Enter your choice(0-2):2 //输入2，即fit瘦模式
Changed to fit mode successfully! //修改成fit瘦模式成功
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3 //进入以太口子菜单
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 5 //修改以太口参数
==========================<ETHERNET PARAMETER SET>==============
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
===================================================================
Protocol (FTP or TFTP) :ftp TFTP
//忽略输出内容，直接输入TFTP，然后回车
Load File Name : wa5300.ipe
//忽略输出内容，直接输入wa5300.ipe，然后回车
Target File Name : wa5300.ipe
//忽略输出内容，直接输入wa5300.ipe，然后回车
Server IP Address :192.168.0.1
//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车
Local IP Address :192.168.0.50
//忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车
Gateway IP Address :0.0.0.0
//忽略输出内容，直接回车
备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 2 //输入2，更新版本
Loading.................................................................................................................................Done.
18165760 bytes downloaded!
Image file wa5300-boot.bin is self-decompressing...
Saving file flash:/wa5300-boot.bin .............Done.
Image file wa5300-system.bin is self-decompressing...
Saving file flash:/wa5300-system.bin .......................................
Done.
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 0 //输入0返回
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0 //输入0，重启AP
System is starting...
设备启动完成
Press ENTER to get started.
<H3C> //升级成功
%Dec 15 18:56:54:395
建议与总结：
先Ctrl+F格式化flash，再Ctrl+Y选择胖模式，最后加载fit版本。
5小时前回答暂无
你正在内容来源：知了社区,EWP-WA5530-SI-FIT切换为瘦AP
